Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[Neptune 4.2]Nikon Coolpix L820 camera is not initialized
10-25-2014, 04:07 PM (This post was last modified: 10-25-2014 06:07 PM by dib.)
Post: #1
Exclamation [Neptune 4.2]Nikon Coolpix L820 camera is not initialized
Hi,
My Nikon Coolpix L820 is recognized, and I can see it under the Cameras, but the init script seems to be missing(? just guessing here) when I attach it to the system. I've tried the Gwenview import, and the dolphin also, nothing shows up (not even an error message camera:/ comes up empty both ways Huh). I've installed the Neptune 4.1 to a virtual machine, but I've got the same result. On a Debian stable virtual machine it is working fine (however) the camera type is not recognized there. (Import is also working with a Kubuntu 14.10)
Can you help me solve this?

Here is some output:
dmesg
Code:
dib@neptune:~$ dmesg|tail -n 30
[16448.069235] <6>[fglrx] Preparing resume fglrx in kernel.
[16448.132970] <6>[fglrx] Resuming fglrx in kernel completed.
[16448.133007] <6>[fglrx] IRQ 56 Enabled
[16448.203221] ata2.01: ACPI cmd ef/03:08:00:00:00:b0 (SET FEATURES) filtered out
[16448.203223] ata2.01: ACPI cmd ef/03:21:00:00:00:b0 (SET FEATURES) filtered out
[16448.203225] ata2.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out
[16448.336168] ata2.01: configured for UDMA/33
[16448.345846] usb 7-1: reset low-speed USB device number 2 using ohci-pci
[16450.331134] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[16450.338232] ata4.00: configured for UDMA/100
[16453.279322] PM: resume of devices complete after 5297.200 msecs
[16453.279699] Restarting tasks ... done.
[16453.303874] alx 0000:03:00.0: irq 55 for MSI/MSI-X
[16453.304038] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[16453.304799] alx 0000:03:00.0 eth0: NIC Up: 1 Gbps Full
[16453.305006] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[16453.951850] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[16453.982086] ata3.00: configured for UDMA/133
[16944.513816] usb 5-4.4: 3:1: cannot get freq at ep 0x82
[16949.512005] usb 5-4.4: 3:1: cannot get freq at ep 0x82
[16954.647323] usb 5-4.4: 3:1: cannot get freq at ep 0x82
[16959.645454] usb 5-4.4: 3:1: cannot get freq at ep 0x82
[16989.871184] zenity[3961]: segfault at 5446 ip 0000000000005446 sp 00007ffffdf619a0 error 14 in zenity[400000+14000]
[17073.694851] apt-check[4133]: segfault at 7f42bc309d60 ip 00007f42bb73d5e8 sp 00007fffaf430310 error 4 in libapt-pkg.so.4.12.0[7f42bb6a8000+127000]
[18993.960592] usb 5-4.1.3: new high-speed USB device number 9 using ehci-pci
[18994.048845] usb 5-4.1.3: New USB device found, idVendor=04b0, idProduct=0192
[18994.048851] usb 5-4.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[18994.048856] usb 5-4.1.3: Product: NIKON DSC COOLPIX L820-PTP
[18994.048859] usb 5-4.1.3: Manufacturer: NIKON
[18994.048862] usb 5-4.1.3: SerialNumber: 000041106235

lsusb
Code:
dib@neptune:~$ lsusb
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 006: ID 045e:076f Microsoft Corp.
Bus 005 Device 009: ID 04b0:0192 Nikon Corp.
Bus 005 Device 008: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 005 Device 007: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 005 Device 005: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 005 Device 004: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business
Bus 007 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Please help me fix this, thanks!

(10-25-2014 04:07 PM)dib Wrote:  Hi,
My Nikon Coolpix L820 is recognized, and I can see it under the Cameras, but the init script seems to be missing(? just guessing here) when I attach it to the system. I've tried the Gwenview import, and the dolphin also, nothing shows up (not even an error message camera:/ comes up empty both ways Huh). I've installed the Neptune 4.1 to a virtual machine, but I've got the same result. On a Debian stable virtual machine it is working fine (however) the camera type is not recognized there. (Import is also working with a Kubuntu 14.10)
Can you help me solve this?

Here is some output:
dmesg
Code:
dib@neptune:~$ dmesg|tail -n 30
[16448.069235] <6>[fglrx] Preparing resume fglrx in kernel.
[16448.132970] <6>[fglrx] Resuming fglrx in kernel completed.
[16448.133007] <6>[fglrx] IRQ 56 Enabled
[16448.203221] ata2.01: ACPI cmd ef/03:08:00:00:00:b0 (SET FEATURES) filtered out
[16448.203223] ata2.01: ACPI cmd ef/03:21:00:00:00:b0 (SET FEATURES) filtered out
[16448.203225] ata2.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out
[16448.336168] ata2.01: configured for UDMA/33
[16448.345846] usb 7-1: reset low-speed USB device number 2 using ohci-pci
[16450.331134] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[16450.338232] ata4.00: configured for UDMA/100
[16453.279322] PM: resume of devices complete after 5297.200 msecs
[16453.279699] Restarting tasks ... done.
[16453.303874] alx 0000:03:00.0: irq 55 for MSI/MSI-X
[16453.304038] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[16453.304799] alx 0000:03:00.0 eth0: NIC Up: 1 Gbps Full
[16453.305006] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[16453.951850] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[16453.982086] ata3.00: configured for UDMA/133
[16944.513816] usb 5-4.4: 3:1: cannot get freq at ep 0x82
[16949.512005] usb 5-4.4: 3:1: cannot get freq at ep 0x82
[16954.647323] usb 5-4.4: 3:1: cannot get freq at ep 0x82
[16959.645454] usb 5-4.4: 3:1: cannot get freq at ep 0x82
[16989.871184] zenity[3961]: segfault at 5446 ip 0000000000005446 sp 00007ffffdf619a0 error 14 in zenity[400000+14000]
[17073.694851] apt-check[4133]: segfault at 7f42bc309d60 ip 00007f42bb73d5e8 sp 00007fffaf430310 error 4 in libapt-pkg.so.4.12.0[7f42bb6a8000+127000]
[18993.960592] usb 5-4.1.3: new high-speed USB device number 9 using ehci-pci
[18994.048845] usb 5-4.1.3: New USB device found, idVendor=04b0, idProduct=0192
[18994.048851] usb 5-4.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[18994.048856] usb 5-4.1.3: Product: NIKON DSC COOLPIX L820-PTP
[18994.048859] usb 5-4.1.3: Manufacturer: NIKON
[18994.048862] usb 5-4.1.3: SerialNumber: 000041106235

lsusb
Code:
dib@neptune:~$ lsusb
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 006: ID 045e:076f Microsoft Corp.
Bus 005 Device 009: ID 04b0:0192 Nikon Corp.
Bus 005 Device 008: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 005 Device 007: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 005 Device 005: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 005 Device 004: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business
Bus 007 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Please help me fix this, thanks!

Idea
Uh it seems, I've spoken too soon, after the cam is initialized the cam is available using a dolphin started with kdesudo:
The path is readable camera:/Nikon%2520Coolpix%2520L820%2520%2520(PTP%2520mode)@usb:005,009/store_00010001/DCIM/100NIKON/ Dodgy but unfortunately I'm not experienced enough to fix this. Sad
Please provide some help, thanks!

Update:
Until it has been fixed I've created a "program" (gwenview_importer.desktop) with the following exec: kdesudo gwenview_importer camera:/. It works great... Big Grin
Update2:
One other problem I've found during testing:
Open with -> kate from dolphin started with kdesudo fails with the following error: kdeinit cannot start "/usr/bin/kate"
Started from the same dolphin, but from the terminal (F4), /usr/bin/kate launches without any error.
Find all posts by this user
Quote this message in a reply
10-25-2014, 06:20 PM (This post was last modified: 10-25-2014 06:21 PM by leszek.)
Post: #2
RE: [Neptune 4.2]Nikon Coolpix L820 camera is not initialized
The only guess I have currently is that maybe the dolphin view is not refreshed (does hitting F5 or the refresh button in menu show some files on the device?). But as gwenview is also not working then there is something going wrong.
Unfortunately I am unable to reproduce this issue with my cameras here.

Can you attach or quote your ~/.xsession-errors file here after you attached the camera and want to download pictures with normal gwenview.
Please also post the output of the terminal command groups.

Quote:Update2:
One other problem I've found during testing:
Open with -> kate from dolphin started with kdesudo fails with the following error: kdeinit cannot start "/usr/bin/kate"
Started from the same dolphin, but from the terminal (F4), /usr/bin/kate launches without any error.
I guess you created your own kate with kdesudo desktop file for open with. You could try to use pkexec instead of kdesudo.
So the command would be pkexec kate
Visit this user's website Find all posts by this user
Quote this message in a reply
10-25-2014, 07:24 PM
Post: #3
RE: [Neptune 4.2]Nikon Coolpix L820 camera is not initialized
(10-25-2014 06:20 PM)leszek Wrote:  The only guess I have currently is that maybe the dolphin view is not refreshed (does hitting F5 or the refresh button in menu show some files on the device?). But as gwenview is also not working then there is something going wrong.
Unfortunately I am unable to reproduce this issue with my cameras here.

Can you attach or quote your ~/.xsession-errors file here after you attached the camera and want to download pictures with normal gwenview.
Please also post the output of the terminal command groups.

Quote:Update2:
One other problem I've found during testing:
Open with -> kate from dolphin started with kdesudo fails with the following error: kdeinit cannot start "/usr/bin/kate"
Started from the same dolphin, but from the terminal (F4), /usr/bin/kate launches without any error.
I guess you created your own kate with kdesudo desktop file for open with. You could try to use pkexec instead of kdesudo.
So the command would be pkexec kate

Quote:The only guess I have currently is that maybe the dolphin view is not refreshed (does hitting F5 or the refresh button in menu show some files on the device?). But as gwenview is also not working then there is something going wrong.
Unfortunately I am unable to reproduce this issue with my cameras here.

Unfortunately the refresh is not an option there Sad , gvenview importer gives the same output (nothing is listed).

~/.xsession-errors end:
Code:
plasma-desktop(3612)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application
plasma-desktop(3612)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application
plasma-desktop(3612)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application
plasma-desktop(3612)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application
plasma-desktop(3612)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application
plasma-desktop(3612)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application
plasma-desktop(3612)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application
plasma-desktop(3612)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x480008e
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x480008e
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x480008e
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x480008e
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x480008e
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x480008e
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x480008e
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x480008e
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x480008e
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x480008e
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x480008e
plasma-desktop(3612)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application
Object::disconnect: No such slot QObject::dataUpdated(QString,Plasma::DataEngine::Data)
Object::disconnect:  (sender name:   '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:12.2/usb5/5-4/5-4.1/5-4.1.3')
kded(3557)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:333: Unable to assign [undefined] to bool mounted
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:317: Unable to assign [undefined] to QString emblemIcon
plasma-desktop(3612)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
plasma-desktop(3612)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/DeviceItem.qml:67: TypeError: Result of expression 'notifierDialog.highlightItem' [null] is not an object.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.

groups:
Code:
dib@neptune:~$ groups
dib root lp cdrom floppy sudo audio dip video plugdev ssh netdev lpadmin fuse powerdev scanner bluetooth pulse vboxusers Kriszta

Quote:I guess you created your own kate with kdesudo desktop file for open with. You could try to use pkexec instead of kdesudo.
So the command would be pkexec kate

No I wanted to use it from the "normal" context menu. Please see the pictures, nothing is altered from my side in the context menu.
   
   
   
Find all posts by this user
Quote this message in a reply
10-25-2014, 09:40 PM
Post: #4
RE: [Neptune 4.2]Nikon Coolpix L820 camera is not initialized
That kdeinit error looks like kdeinit crashed or isn't accessible to dolphin anymore.
Does this error also appear on a restart or relogin to the desktop ?

As for the Nikon Coolpix problem might be related to the above. But not sure.
Visit this user's website Find all posts by this user
Quote this message in a reply
10-25-2014, 11:30 PM (This post was last modified: 10-25-2014 11:32 PM by dib.)
Post: #5
RE: [Neptune 4.2]Nikon Coolpix L820 camera is not initialized
(10-25-2014 09:40 PM)leszek Wrote:  That kdeinit error looks like kdeinit crashed or isn't accessible to dolphin anymore.
Does this error also appear on a restart or relogin to the desktop ?

As for the Nikon Coolpix problem might be related to the above. But not sure.

Hmm, I renamed the file ~/.xsession-errors, and restarted. It seems that the restart has fixed the root kate startup error. Strange, because I had several restarts since the problem first appeared. The first restart after the rename produced the following log...
~/.xsession-errors:
Code:
dib@neptune:~$ cat ~/.xsession-errors
Xsession: X session started for dib at 2014. okt. 25., szombat, 22.59.27 CEST
localuser:dib being added to access control list
Setting IM through im-switch for locale=hu_HU.
Start IM through /etc/X11/xinit/xinput.d/all_ALL linked to /etc/X11/xinit/xinput.d/default.
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kbuildsycoca4 running...
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QObject::connect: Cannot connect (null)::deviceFound(Device*) to BlueDevilDaemon::deviceFound(Device*)
QObject::connect: Cannot connect QTimer::timeout() to (null)::stopDiscovery()
kded(3702)/kdeconnect_kded Kded::Kded: kded_kdeconnect started
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
No outputs have backlight property
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5'
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
kded(3702)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
kded(3702)/kdeconnect_kded Kded::start: Starting daemon  "/usr/lib/kde4/libexec/kdeconnectd"
kded(3702)/kdeconnect_kded Kded::daemonStarted: Daemon successfuly started
kded(3702) PowerDevil::Core::loadProfile: The profile  "AC" tried to activate "DimDisplay" a non existent action. This is usually due to an installation problem or to a configuration problem. or simlpy the action is not supported
kactivitymanagerd(4262)/nepomuk (library): Could not find virtuoso to connect to. Aborting
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread                                                                                                                      
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread                                                                                                                      
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread                                                                                                                      
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread                                                                                                                      
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread                                                                                                                      
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread                                                                                                                      
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.                                                                                                            
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.                                                                                                            
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.                                                                                                            
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.                                                                                                            
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.                                                                                                            
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.                                                                                                            
OpenGL vendor string:                   ATI Technologies Inc.                                                                                                                                                    
OpenGL renderer string:                 AMD Radeon HD 8570D                                                                                                                                                      
OpenGL version string:                  3.1.12968 Compatibility Profile Context 14.10                                                                                                                            
OpenGL shading language version string: 4.40                                                                                                                                                                    
Driver:                                 Catalyst
Driver version:                         3.1.12968
GPU class:                              Unknown
OpenGL version:                         3.1.12968
GLSL version:                           4.40
X server version:                       1.12.4
Linux kernel version:                   3.16.3
Direct rendering:                       yes
Requires strict binding:                yes
GLSL shaders:                           yes
Texture NPOT support:                   yes
Virtual Machine:                        no
OpenGL vendor string:                   ATI Technologies Inc.
OpenGL renderer string:                 AMD Radeon HD 8570D
OpenGL version string:                  3.1.12968 Compatibility Profile Context 14.10
OpenGL shading language version string: 4.40
Driver:                                 Catalyst
Driver version:                         3.1.12968
GPU class:                              Unknown
OpenGL version:                         3.1.12968
GLSL version:                           4.40
X server version:                       1.12.4
Linux kernel version:                   3.16.3
Direct rendering:                       yes
Requires strict binding:                yes
GLSL shaders:                           yes
Texture NPOT support:                   yes
Virtual Machine:                        no
QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
plasma-desktop(5138)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(5138)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(5138)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(5138)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
QGraphicsLinearLayout::insertItem: cannot insert null item
plasma-desktop(5138)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
## Loading catalog liblancelot-datamodels
## Loading catalog liblancelot-datamodels
load main catalog ###
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
plasma-desktop(5138)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
lancelot(5169)/libakonadi Akonadi::AgentManagerPrivate::createDBusInterface: AgentManager failed to get a valid AgentManager DBus interface. Error is: 1 "org.freedesktop.DBus.Error.NameHasNoOwner" "Could not get owner of name 'org.freedesktop.Akonadi.Control': no such name"
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
lancelot(5169)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: "QLocalSocket::connectToServer: Invalid name"
lancelot(5169)/kdecore (services) KServiceFactory::findServiceByDesktopPath: "kopete" not found
Failed to use database "/home/user/.local/share/akonadi/akonadi.db"
Database error: "unable to open database file Error opening database"
Trying to create database now...
QSqlDatabasePrivate::removeDatabase: connection 'initConnection' is still in use, all queries will cease to work.
Detected Btrfs, disabling copy-on-write on database files
Failed to open "/home/user/.local/share/akonadi/akonadi.db" to modify flags ( 2 )
Could not open sqlite database  "/home/user/.local/share/akonadi/akonadi.db"  with driver  "QSQLITE3"  for initialization
Database error: Cannot open database.
Last driver error: "Error opening database"
Last database error: "unable to open database file"
Unable to open database "unable to open database file Error opening database"
"[
0: akonadiserver() [0x419264]
1: akonadiserver() [0x419591]
2: /lib/x86_64-linux-gnu/libc.so.6(+0x321e0) [0x7f3cf5fa21e0]
3: /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x35) [0x7f3cf5fa2165]
4: /lib/x86_64-linux-gnu/libc.so.6(abort+0x180) [0x7f3cf5fa53e0]
5: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x122) [0x7f3cf7517722]
6: akonadiserver() [0x41b4db]
7: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0xb4) [0x7f3cf75b1944]
8: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(+0x11c5ef) [0x7f3cf75bc5ef]
9: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3b) [0x7f3cf75c4beb]
10: akonadiserver() [0x41e020]
11: akonadiserver() [0x4f4444]
12: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN7QObject5eventEP6QEvent+0x26e) [0x7f3cf7631a2e]
13: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN16QCoreApplication14notifyInternalEP7QObjectP6QEvent+0x8e) [0x7f3cf761cb5e]
14: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN23QCoreApplicationPrivate16sendPostedEventsEP7QObjectiP11QThre​adData+0x421) [0x7f3cf76209e1]
15: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(+0x1ab0e3) [0x7f3cf764b0e3]
16: /lib/x86_64-linux-gnu/libglib-2.0.so.0(g_main_context_dispatch+0x135) [0x7f3cf5473955]
17: /lib/x86_64-linux-gnu/libglib-2.0.so.0(+0x4bc98) [0x7f3cf5473c98]
18: /lib/x86_64-linux-gnu/libglib-2.0.so.0(g_main_context_iteration+0x34) [0x7f3cf5473d54]
19: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN20QEventDispatcherGlib13processEventsE6QFlagsIN10QEventLoop17P​rocessEventsFlagEE+0x66) [0x7f3cf764b276]
20: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN10QEventLoop13processEventsE6QFlagsINS_17ProcessEventsFlagEE+0​x2f) [0x7f3cf761b8af]
21: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN10QEventLoop4execE6QFlagsINS_17ProcessEventsFlagEE+0x138) [0x7f3cf761bb38]
22: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN16QCoreApplication4execEv+0x88) [0x7f3cf7620cf8]
23: akonadiserver() [0x4140c0]
24: /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7f3cf5f8eead]
25: akonadiserver() [0x414ad1]
]
"
ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error)
Failed to use database "/home/user/.local/share/akonadi/akonadi.db"
Database error: "unable to open database file Error opening database"
Trying to create database now...
QSqlDatabasePrivate::removeDatabase: connection 'initConnection' is still in use, all queries will cease to work.
Detected Btrfs, disabling copy-on-write on database files
Failed to open "/home/user/.local/share/akonadi/akonadi.db" to modify flags ( 2 )
Could not open sqlite database  "/home/user/.local/share/akonadi/akonadi.db"  with driver  "QSQLITE3"  for initialization
Database error: Cannot open database.
Last driver error: "Error opening database"
Last database error: "unable to open database file"
Unable to open database "unable to open database file Error opening database"
"[
0: akonadiserver() [0x419264]
1: akonadiserver() [0x419591]
2: /lib/x86_64-linux-gnu/libc.so.6(+0x321e0) [0x7f5253e0a1e0]
3: /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x35) [0x7f5253e0a165]
4: /lib/x86_64-linux-gnu/libc.so.6(abort+0x180) [0x7f5253e0d3e0]
5: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x122) [0x7f525537f722]
6: akonadiserver() [0x41b4db]
7: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0xb4) [0x7f5255419944]
8: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(+0x11c5ef) [0x7f52554245ef]
9: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3b) [0x7f525542cbeb]
10: akonadiserver() [0x41e020]
11: akonadiserver() [0x4f4444]
12: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN7QObject5eventEP6QEvent+0x26e) [0x7f5255499a2e]
13: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN16QCoreApplication14notifyInternalEP7QObjectP6QEvent+0x8e) [0x7f5255484b5e]
14: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN23QCoreApplicationPrivate16sendPostedEventsEP7QObjectiP11QThre​adData+0x421) [0x7f52554889e1]
15: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(+0x1ab0e3) [0x7f52554b30e3]
16: /lib/x86_64-linux-gnu/libglib-2.0.so.0(g_main_context_dispatch+0x135) [0x7f52532db955]
17: /lib/x86_64-linux-gnu/libglib-2.0.so.0(+0x4bc98) [0x7f52532dbc98]
18: /lib/x86_64-linux-gnu/libglib-2.0.so.0(g_main_context_iteration+0x34) [0x7f52532dbd54]
19: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN20QEventDispatcherGlib13processEventsE6QFlagsIN10QEventLoop17P​rocessEventsFlagEE+0x66) [0x7f52554b3276]
20: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN10QEventLoop13processEventsE6QFlagsINS_17ProcessEventsFlagEE+0​x2f) [0x7f52554838af]
21: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN10QEventLoop4execE6QFlagsINS_17ProcessEventsFlagEE+0x138) [0x7f5255483b38]
22: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN16QCoreApplication4execEv+0x88) [0x7f5255488cf8]
23: akonadiserver() [0x4140c0]
24: /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7f5253df6ead]
25: akonadiserver() [0x414ad1]
]
"
ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error)
Failed to use database "/home/user/.local/share/akonadi/akonadi.db"
Database error: "unable to open database file Error opening database"
Trying to create database now...
QSqlDatabasePrivate::removeDatabase: connection 'initConnection' is still in use, all queries will cease to work.
Detected Btrfs, disabling copy-on-write on database files
Failed to open "/home/user/.local/share/akonadi/akonadi.db" to modify flags ( 2 )
Could not open sqlite database  "/home/user/.local/share/akonadi/akonadi.db"  with driver  "QSQLITE3"  for initialization
Database error: Cannot open database.
Last driver error: "Error opening database"
Last database error: "unable to open database file"
Unable to open database "unable to open database file Error opening database"
"[
0: akonadiserver() [0x419264]
1: akonadiserver() [0x419591]
2: /lib/x86_64-linux-gnu/libc.so.6(+0x321e0) [0x7fb75fbc21e0]
3: /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x35) [0x7fb75fbc2165]
4: /lib/x86_64-linux-gnu/libc.so.6(abort+0x180) [0x7fb75fbc53e0]
5: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x122) [0x7fb761137722]
6: akonadiserver() [0x41b4db]
7: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0xb4) [0x7fb7611d1944]
8: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(+0x11c5ef) [0x7fb7611dc5ef]
9: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3b) [0x7fb7611e4beb]
10: akonadiserver() [0x41e020]
11: akonadiserver() [0x4f4444]
12: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN7QObject5eventEP6QEvent+0x26e) [0x7fb761251a2e]
13: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN16QCoreApplication14notifyInternalEP7QObjectP6QEvent+0x8e) [0x7fb76123cb5e]
14: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN23QCoreApplicationPrivate16sendPostedEventsEP7QObjectiP11QThre​adData+0x421) [0x7fb7612409e1]
15: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(+0x1ab0e3) [0x7fb76126b0e3]
16: /lib/x86_64-linux-gnu/libglib-2.0.so.0(g_main_context_dispatch+0x135) [0x7fb75f093955]
17: /lib/x86_64-linux-gnu/libglib-2.0.so.0(+0x4bc98) [0x7fb75f093c98]
18: /lib/x86_64-linux-gnu/libglib-2.0.so.0(g_main_context_iteration+0x34) [0x7fb75f093d54]
19: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN20QEventDispatcherGlib13processEventsE6QFlagsIN10QEventLoop17P​rocessEventsFlagEE+0x66) [0x7fb76126b276]
20: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN10QEventLoop13processEventsE6QFlagsINS_17ProcessEventsFlagEE+0​x2f) [0x7fb76123b8af]
21: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN10QEventLoop4execE6QFlagsINS_17ProcessEventsFlagEE+0x138) [0x7fb76123bb38]
22: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN16QCoreApplication4execEv+0x88) [0x7fb761240cf8]
23: akonadiserver() [0x4140c0]
24: /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7fb75fbaeead]
25: akonadiserver() [0x414ad1]
]
"
ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error)
Failed to use database "/home/user/.local/share/akonadi/akonadi.db"
Database error: "unable to open database file Error opening database"
Trying to create database now...
QSqlDatabasePrivate::removeDatabase: connection 'initConnection' is still in use, all queries will cease to work.
Detected Btrfs, disabling copy-on-write on database files
Failed to open "/home/user/.local/share/akonadi/akonadi.db" to modify flags ( 2 )
Could not open sqlite database  "/home/user/.local/share/akonadi/akonadi.db"  with driver  "QSQLITE3"  for initialization
Database error: Cannot open database.
Last driver error: "Error opening database"
Last database error: "unable to open database file"
Unable to open database "unable to open database file Error opening database"
"[
0: akonadiserver() [0x419264]
1: akonadiserver() [0x419591]
2: /lib/x86_64-linux-gnu/libc.so.6(+0x321e0) [0x7f412b3ea1e0]
3: /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x35) [0x7f412b3ea165]
4: /lib/x86_64-linux-gnu/libc.so.6(abort+0x180) [0x7f412b3ed3e0]
5: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x122) [0x7f412c95f722]
6: akonadiserver() [0x41b4db]
7: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0xb4) [0x7f412c9f9944]
8: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(+0x11c5ef) [0x7f412ca045ef]
9: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3b) [0x7f412ca0cbeb]
10: akonadiserver() [0x41e020]
11: akonadiserver() [0x4f4444]
12: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN7QObject5eventEP6QEvent+0x26e) [0x7f412ca79a2e]
13: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN16QCoreApplication14notifyInternalEP7QObjectP6QEvent+0x8e) [0x7f412ca64b5e]
14: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN23QCoreApplicationPrivate16sendPostedEventsEP7QObjectiP11QThre​adData+0x421) [0x7f412ca689e1]
15: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(+0x1ab0e3) [0x7f412ca930e3]
16: /lib/x86_64-linux-gnu/libglib-2.0.so.0(g_main_context_dispatch+0x135) [0x7f412a8bb955]
17: /lib/x86_64-linux-gnu/libglib-2.0.so.0(+0x4bc98) [0x7f412a8bbc98]
18: /lib/x86_64-linux-gnu/libglib-2.0.so.0(g_main_context_iteration+0x34) [0x7f412a8bbd54]
19: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN20QEventDispatcherGlib13processEventsE6QFlagsIN10QEventLoop17P​rocessEventsFlagEE+0x66) [0x7f412ca93276]
20: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN10QEventLoop13processEventsE6QFlagsINS_17ProcessEventsFlagEE+0​x2f) [0x7f412ca638af]
21: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN10QEventLoop4execE6QFlagsINS_17ProcessEventsFlagEE+0x138) [0x7f412ca63b38]
22: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN16QCoreApplication4execEv+0x88) [0x7f412ca68cf8]
23: akonadiserver() [0x4140c0]
24: /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7f412b3d6ead]
25: akonadiserver() [0x414ad1]
]
"
ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error)
"akonadiserver" crashed too often and will not be restarted!
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
========================>  4 0
plasma-desktop(5138)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
plasma-desktop(5138)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "org.kde.windowedwidgets"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "techbase"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 1 offers for "Kill Runner"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "translator"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "wikitravel"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "locations"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 1 offers for "Spell Checker"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "webshortcuts"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "konsolesessions"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 1 offers for "CharacterRunner"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "recentdocuments"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "baloosearch"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "youtube"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 1 offers for "org.kde.events_runner"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "nepomuksearch"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "places"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "services"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "org.kde.datetime"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "kabccontacts"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 1 offers for "Audio Player Control Runner"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "windows"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "solid"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "shell"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "org.kde.activities"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "katesessions"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "wikipedia"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "krunner_kget"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "bookmarks"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 1 offers for "Dictionary"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "desktopsessions"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "browserhistory"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "calculator"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "kopete_runner"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "PowerDevil"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "plasma-desktop"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "konquerorsessions"
lancelot(5169)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "unitconverter"
link XMLID_34_ hasn't been detected!
link XMLID_34_ hasn't been detected!
link XMLID_36_ hasn't been detected!
kded(3702)/Network Management (NetworkManager backend) ConnectionDbus::fromDbusMap: Setting  "ipv4" not initialized
kded(3702)/Network Management (NetworkManager backend) ConnectionDbus::fromDbusMap: Setting  "ipv6" not initialized
kded(3702)/Network Management (NetworkManager backend) ConnectionDbus::fromDbusMap: Setting  "802-1x" not initialized
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kded(3702)/kdecore (trader) KServiceTypeTrader::defaultOffers: KServiceTypeTrader: serviceType  "SolidModemManager"  not found
plasma-desktop-screen-1(5139)/libplasma Plasma::PackagePrivate::isValid: Could not find required directory images
plasma-desktop-screen-1(5139)/libplasma Plasma::PackagePrivate::isValid: Could not find required directory images
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
lancelot(5169)/kdecore (services) KServiceFactory::findServiceByDesktopPath: "searchproviders/wikit.desktop" not found
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:103: TypeError: Result of expression 'listView' [null] is not an object.
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:175: ReferenceError: Can't find variable: sectionsRepeater
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:103: Error: Cannot assign [undefined] to QString
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_100: Possible anchor loop detected on fill.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_100: Possible anchor loop detected on fill.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_100: Possible anchor loop detected on fill.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_100: Possible anchor loop detected on fill.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_100: Possible anchor loop detected on fill.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_100: Possible anchor loop detected on fill.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_100: Possible anchor loop detected on fill.
link XMLID_34_ hasn't been detected!
link XMLID_34_ hasn't been detected!
link XMLID_36_ hasn't been detected!
plasma-desktop(5138)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
plasma-desktop(5138)/libplasma Plasma::PackagePrivate::isValid: Could not find required directory images
plasma-desktop(5138)/libplasma Plasma::PackagePrivate::isValid: Could not find required directory images
plasma-desktop(5138)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
I/O warning : failed to load external entity "/home/dib/.qalculate/eurofxref-daily.xml"
I/O warning : failed to load external entity "/home/dib/.qalculate/eurofxref-daily.xml"
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
unnamed app(5283) kdemain: Xlib XKB extension major= 1  minor= 0
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
## Loading catalog liblancelot-datamodels
load main catalog ###
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kaccess(5283) kdemain: X server XKB extension major= 1  minor= 0
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
krunner(5308)/kdecore (services) KServiceFactory::findServiceByDesktopPath: "searchproviders/wikit.desktop" not found
I/O warning : failed to load external entity "/home/dib/.qalculate/eurofxref-daily.xml"
I/O warning : failed to load external entity "/home/dib/.qalculate/eurofxref-daily.xml"
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
/usr/bin/skype: unrecognized option '-session'
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
konsole(5450) Konsole::KeyboardTranslatorReader::readNext: Key "Space+Ctrl" , Command """" not understood.  
konsole(5450) Konsole::KeyboardTranslatorReader::readNext: Key "ScrollLock" , Command "ScrollLock" not understood.  
usage: synaptikscfg [-h] [--version] {init,load,save} ...
synaptikscfg: error: no touchpad found
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
konsole(5450) Konsole::Session::run: Attempted to re-run an already running session.

The opening of gwenview importer, or dolphin didn't produced any new errors.
I will try to deal with akonadi errors, but the strange thing is, my virtual neptune doing the same. How can I check that the same rights are present for all of the users for the devices? I've found this in the meantime:

https://forum.kde.org/viewtopic.php?f=21...d&start=15

By the way, the camera info:
Code:
Manufacturer: Nikon Corporation
Model: L820
  Version: COOLPIX L820V1.1
  Serial Number: 000041106235
Vendor Extension ID: 0xa (1.0)
Vendor Extension Description: microsoft.com: 1.0;

Capture Formats: JPEG
Display Formats: Undefined Type, JPEG, Association/Directory, DPOF, Apple Quicktime, Defined Type

Device Capabilities:
    File Download, File Deletion, File Upload
    Generic Image Capture, No Open Capture, No vendor specific capture

Storage Devices Summary:
store_00010001:
    StorageDescription: Nincs
    VolumeLabel: Nincs
    Storage Type: Removable RAM (memory card)
    Filesystemtype: Digital Camera Layout (DCIM)
    Access Capability: Read-Write
    Maximum Capability: 1977286656 (1885 MB)
    Free Space (Bytes): 1977188352 (1885 MB)
    Free Space (Images): 648

Device Property Summary:
Battery Level(0x5001):(read only) (type=0x2) Enumeration [2,5,25,50,65,80,100] value: 80% (80)
Dátum és idő(0x5011):(readwrite) (type=0xffff) '20141025T233247'
Property 0xd407:(read only) (type=0x6) 1
Property 0xd303:(read only) (type=0x2) 1
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)